The Service Lift can be installed by our fitters
in just a few days with the minimum disruption
to premises. Preliminary builder’s work is
straightforward. All that is normally required prior
to installation is an appropriately-sized opening in
each floor, a flat level base capable of supporting
downward deadloads and an electrical power
supply at the top floor served.
We can provide your builder with exact builder’s
work details and drawings for your installation and,
where necessary, liaise directly with the builder to
ensure the whole operation runs smoothly.
After the Installation
Your builder will need to provide an enclosure
around the Service Lift to protect against moving
parts and conform with your local fire regulations.
Permanent safe access to the motor must be
provided to comply with current safety regulations.
The lift installation and associated builder’s
work should comply with the Supply of Machinery
(Safety) Regulation 2008 and be ‘CE’ marked
The floor to ceiling height on the top floor served
must be able to accommodate the winding unit.
If there is insufficient headroom, we can make
substantial reductions with our ‘Low Headroom’
settings and suggest you contact us for details.
This is normally set at 800mm but is fully adjustable
before installation. To accept trolleys, the
serving height can be at floor level – contact us
These dimensions give the minimum inside shaft
width and depth that must be prov